Главная> Блог
February 20, 2023
Valve installation of the five major points

1 direction and position Many valves have directivity For example, cut-off valves, throttle valves, pressure reducing valves, check valves, etc. If installed anti-flip,

February 18, 2023
Thermostatic mixing valve use and debugging safety precautions

Mixed water thermostatic valve is a heating system supporting products, widely used in electric water heaters, solar water heaters and central heating systems. And can be applied to electric wat

September 30, 2022
Improvement of slag inclusion defects in ductile iron castings by casting system

Nodular Cast Iron (Nodular Cast Iron) is a metal material with excellent mechanical properties. It is obtained by adding a spheroidizing agent and an inoculant to the molten iron to make the gra

September 30, 2022
Production practice of no-retractor riser in nodular cast iron gear castings

This paper introduces the production experience of the production of medium and large ductile iron gear parts without shrinkage riser. It uses external cooling iron for rain gate, tooth surface and sh

September 30, 2022
Application of Ultrasonic Testing Technology on Large Ductile Iron Castings

Ultrasonic waves are widely used for the detection of the intrinsic quality of metal products due to their characteristic acoustic characteristics such as self-reflection, refraction, and diffract

September 29, 2022
Introduction to the hardness requirements of grey iron castings for motor vehicles

Gray iron castings are general engineering gray iron castings that are mainly used for tensile strength. The castings are graded according to the tensile strength of differen

September 29, 2022
Production Practice of Cupola Furnace Smelting RQTSi5 Heat-Resistant Ductile Iron Castings

The spheroidization rate is 2, the ball diameter is 6 and the base 268 is our factory adopting the 944188 ductile iron metallographic standard. 26; refers to the number of pearlite in the matrix

September 29, 2022
Anshan Iron and Steel successfully developed large steel castings for the runners of the Three Gorges turbine

The large-scale steel castings of the lower ring of the Three Gorges right-hand unit runner developed by Anshan Iron and Steel Group Heavy Machinery Co., Ltd. passed the technical ap

September 28, 2022
Selection of raw materials in the production of wind power ductile iron castings

With the rapid development of wind power industry in the world, the production of wind power castings has shown a good momentum in China's foundry industry. At the sam

September 28, 2022
Selection of raw materials in the production of wind power ductile iron castings

With the rapid development of wind power industry in the world, the production of wind power castings has shown a good momentum in China's foundry industry. At the sam

September 28, 2022
Re-cast 145 tons of the world's largest single iron ball casting machine castings successfully

Recently, the world's largest single cast iron machine tool casting of 145 tons of Heavy Machinery Casting Co., Ltd. (hereinafter referred to as “North First H

Hebei Chunfeng International Trade Co., Ltd Hebei Chunfeng International Trade Co., Ltd. является дочерней дочерней компанией Chunfeng Industrial Group. Группа Чунфенга, найденная в 1972 году. Сейчас имеет 50 лет истории в отраслевой линии....

NewsLetter

  • Mobile-Phone
    +8613473836120
  • Электронная Почта
  • Адрес Компании
    No.86 of Jixin West Road, Jizhou District, Hengshui City, Hebei Province, Hengshui, Hebei China
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Отправить